TECHNICAL DATA
Where to find serial number?
Ksyrium Pro Carbon SLC Disc HR
Instructions
Spare parts
Rims
| 1 | V2734010 | KIT FRONT RIM KSYRIUM PRO CARBON SL UST DISC |
| 1 | V2409810 | KIT FT RIM KSYRIUM PRO CARBON SL Clinch DISC HR - while stock last |
| N/A | V2620101 | UST RIM TAPE 25mm (for 21-24mm wide rim) |
| N/A | V2690101 | KIT CARBON RIM TAPE 21x622mm - FOR CARBON RIM |
Spokes
| 2 | V2273101 | KIT 1 FT 285/1 FT 291/1 DS 273 KSY PRO CARB SL C/D/T HR SPK |
| 2 | V2271501 | KIT 12 FT KSY PRO CARB SL D/NDS KSY PRO CARB SL SPK 291mm - while stock last |
Wheel Hub
| 3 | N/A | HUB BODY |
| 4 | 99688601 | BEARING KIT 9/15 DCL HUB 20x32x7 6804 + 25x37x7 6805 |
| 4 | V2540501 | KIT FRONT BEARINGS 20x32x7 + 25x37x7 CERAMIC - while stock last |
| 5 | V2252401 | KIT MY16 FRONT AXLE ROAD DISC 9/12/15 CL |
Tyres
| 9 | 39435825 | YksionProPowerLink HRTubular |
Adapters
| 6 | B4104301 | ADAPTER Ft 9mm QR QRM+ |
| 7 | B4104201 | ADAPTER Ft 12mm QRM+ |
| 8 | B4104401 | ADAPTER Ft 15mm QRM+ |
Information
Rims
Valve hole à (mm): 6.5
Recommended clincher/tubular width:
25 to 32Â mm
Spokes
Lacing pattern: isopulse
Tension (kg) : 110/140 rear
Tension (kg) : 110/140 rear
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
Spare parts
Rims
| 1 | V2409913 | KIT RR RIM KSYRIUM PRO CARBON SL Clinch DISC HR - while stock last |
| 1 | V2733713 | KIT REAR RIM KSYRIUM PRO CARBON SL UST DISC |
| N/A | V2620101 | UST RIM TAPE 25mm (for 21-24mm wide rim) |
| N/A | V2690101 | KIT CARBON RIM TAPE 21x622mm - FOR CARBON RIM |
Spokes
| 2 | V2271501 | KIT 12 FT KSY PRO CARB SL D/NDS KSY PRO CARB SL SPK 291mm - while stock last |
| 2 | V3663201 | KIT 12 DS KSY PRO CARB SL UST/UST Disc/C Disc/T Disc BUTTED AERO STAINLESS SPOKE 273 + alu nipp.+ wash. |
| 3 | V3663301 | KIT 12 FRT KSYR PRO CARB SL UST Disc + NDS KSYR PRO CARB SL UST UB/Disc AER STAINLESS SPK 291 + alu nippl.wash |
| 3 | V2273101 | KIT 1 FT 285/1 FT 291/1 DS 273 KSY PRO CARB SL C/D/T HR SPK |
| 3 | V2271401 | KIT 12 DS KSYRIUM PRO CARB SL T SPOKE 273mm - while stock last |
Wheel Hub
| 4 | N/A | HUB BODY |
| 5 | V2540401 | KIT REAR BEARINGS 17x28x7 + 15x28x7 CERAMIC - while stock last |
| 5 | V2560201 | KIT ID360 BEARINGS 15/28/7 + 17/28/7 |
| 6 | V2252701 | KIT ID360 INSERT SHAPED EAR LOBE > 2017 |
| 7 | V2251601 | KIT ID360 SEAL + GREASE |
| 8 | V2500501 | KIT ID360 3 PADS NOISE REDUCING |
| 9 | V2251701 | KIT ID360 2 RATCHETS + SPRING + GREASE |
| 10 | V2251801 | KIT 3 ID360 ROAD SPRINGS |
| 11 | V3430101 | HG11 Freewheel Body ID360 |
| 12 | V2252201 | KIT 2 REAR HUB RETENTION RINGS 48mm |
| 13 | V2251501 | KIT 3 ID360 WAVE WASHERS |
| 14 | V2251401 | KIT ID360 AXLE DISC CENTER LOCK |
| 15 | V2251101 | KIT ID360 HUB THREADED CAP DISC CENTER LOCK |
Tyres
| 17 | 39436025 | YksionProPowerLink HR |
Adapters
| 16 | B4989901 | ADAPTER Rr 12x142mm ID360 (CLock) |
Information
Rims
Valve hole à (mm): 6,5
Recommended clincher/tubular width:
25 to 32Â mm
Spokes
Lacing pattern: IsopulseÂ
Tension (kg) 110/120 rear
Tension (kg) 110/120 rear
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
DELIVERED WITH
| (B4104201) | Front 12 mm adapters |
| (B49 896 01 for ID360 6T, B49 899 01 for ID360 CL) | Rear 12x142mm adapters for Instant Drive 360 |
| (308 719 01) | Specific disc bolts |
| Rim tape | |
| (325 423 01) | Multifonction adjustment wrench |
| "Haute Route" special edition wheelbags | |
| User guide |