TECHNICAL DATA
Where to find serial number?
Crossride Light WTS 27.5
Instructions- Front 26" Weight : 850 g
- Front 27.5" Weight : 880 g
- Front 29" Weight : 930 g
Spare parts
Rims
| 1 | V2314515 | "KIT FRONT/REAR RIM CROSSRIDE LIGHT 27,5""" |
Spokes
| 2 | V2381801 | KIT 12 FT/NDS XRIDE LIGHT 27,5'' SPK 277mm |
Wheel Hub
| 3 | N/A | HUB BODY |
| 4 | 99688501 | BEARING KIT 9/12/15 D6T HUB 20x32x7 6804 |
| 5 | V2370101 | KIT FRONT AXLE 15MM CROSSONE/-RIDE/-ROC - while stock last |
| 5 | V2371101 | KIT FRONT QRM AXLE 100mm/BOOST 110mm |
| 6 | V2370301 | KIT FRONT AUTO ADJUSTING PLAY 15mm AXLE |
Information
Rims
à Valve hole (mm): 8,5 with pop off reducer
Recommended clincher/tubular width:
1.4" to 2.7"
Spokes
Lacing pattern: 2-cross
Tension (kg): 100/120 front
Tension (kg): 100/120 front
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
- Rear 26" Weight : 970 g
- Rear 27.5" Weight : 1000 g
- Rear 29" Weight : 1050 g
Spare parts
Rims
| 1 | V2314515 | "KIT FRONT/REAR RIM CROSSRIDE LIGHT 27,5""" |
Spokes
| 2 | V2381801 | KIT 12 FT/NDS XRIDE LIGHT 27,5'' SPK 277mm |
| 3 | V2382001 | KIT 12 DS CROSSRIDE LIGHT 27,5'' SPOKE 275mm |
Wheel Hub
| 4 | N/A | HUB BODY |
| 5 | M40076 | HUB BEARINGS 17x30x7 6903 x 2 |
| 6 | V2371201 | KIT REAR QRM AXLE 135-142 / BOOST 148mm |
| 7 | 35124501 | SET OF 3 REAR AXLE/FREEWHEEL BODY SPACERS MTB L1 |
| 8 | 35126301 | TS-2 FREEWHEEL BODY + SEAL 2013 (NO PAWLS) - while stock last |
| 9 | 99610601 | PAWLS KIT FOR ITS-4 (OR TS-2) |
| 10 | V2370401 | KIT REAR AUTO ADJUSTING PLAY 12mm AXLE |
Information
Rims
à Valve hole (mm): 8,5 with pop off reducer
Recommended clincher/tubular width:
1.4" to 2.7"
Spokes
Lacing pattern: 2-cross
Tension (kg) : 110/130 rear
Tension (kg) : 110/130 rear
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
DELIVERED WITH
| Rim tape | |
| Rear 12x142mm adapters | |
| User guide |