Cosmic Pro Carbon SL UST Disc
- Gewicht : 685 g
Ersatzteile
Felgen
1 | V2736510 | KIT FRONT RIM COSMIC PRO CARBON SL UST Disc 19 |
N/A | V2620101 | UST RIM TAPE 25mm (for 21-24mm wide rim) |
Speichen
2 | V3663501 | KIT 12 BUTTED AERO STAINLESS SPOKE 277 + alu nipple + washer |
2 | V3665201 | KIT 1 FRT 277 + 1 NDS 271 COSMIC PRO CARBON SL UST D 19 STAMPED BTD AERO STAINLESS SPOKE + alu nippl.wash |
Radnabe
3 | N/A | NABENKÖRPER |
4 | M40129 | KIT 2 BEARINGS 6902 15x28x7 |
5 | V2373301 | KIT QRM AUTO FRONT AXLE 12mm > 2019 |
Tyres
6 | 39938825 | Yksion Pro UST 700x25 |
{adapters}
OPTION | V2680301 | "Kit Ft Road Adapter 12 >> 9mm" |
Informationen
- Gewicht : 850 g
Ersatzteile
Felgen
1 | V4092815 | Kit Front/Rear rim Cosmic SL 45 Disc |
1 | V2736013 | KIT REAR RIM COSMIC PRO CARBON SL UST Disc 19 - while stock last |
N/A | V2620101 | UST RIM TAPE 25mm (for 21-24mm wide rim) |
Speichen
2 | V3662201 | KIT 12 FRT COSMIC PRO CARB SL T/C/UST & NDS CPC SL BUTTED AERO STAINLESS SPOKE 271 + alu nipp.wash |
2 | V3665201 | KIT 1 FRT 277 + 1 NDS 271 COSMIC PRO CARBON SL UST D 19 STAMPED BTD AERO STAINLESS SPOKE + alu nippl.wash |
3 | V3662301 | KIT 12 FRT/NDS COMETE PRO CARB SL T/UST D & DS COSMIC PRO CARB SL UST D BTD AER STAINL.SPK 253 + alu nipp.wash |
Radnabe
4 | N/A | NABENKÖRPER |
5 | V2560401 | KIT ID360 2 BEARINGS 17x28x7 + CIRCLIP + WAVED WASHER (QRM AUTO HUB) |
6 | V2252901 | KIT ID360 CENTER LOCK 135/142mm AXLE WITH CIRCLIP |
7 | V2252701 | KIT ID360 INSERT SHAPED EAR LOBE > 2017 |
8 | V2251601 | ID360 SEAL + GREASE |
9 | V2251701 | ID360 2 RATCHETS + SPRING + GREASE |
10 | V2500501 | Kit 3 ID360 pad for noise reduction |
11 | V2251801 | KIT 3 ID360 ROAD SPRINGS |
12 | V3430101 | HG11 Freewheel Body ID360 |
13 | V2560501 | KIT ADJUST. SYSTEM QRM AUTO ID360 for 17x28x7 bearing |
15 | V2252201 | KIT 2 REAR HUB RETENTION RINGS 48mm |
Tyres
16 | 39938825 | Yksion Pro UST 700x25 |
{adapters}
14 | V2510701 | ID360 EVO REAR AXLE ADAPTERS 12x142mm DCL & D6T |
OPTION | V2510801 | ID360 EVO REAR AXLE ADAPTERS 9x135mm DCL & D6T |
OPTION | V2510901 | ID360 EVO REAR AXLE ADAPTERS 12x135mm DCL & D6T |
Informationen
GELIEFERT MIT
(355 466 01) | 1 Flasche Mavic Sealant (beim Hinterrad) |
Spritze für Dichtmittel | |
(996 941 01 für MTB oder B41 043 01 für Rennrad) | Achsstummel für Schnellspanner (VR) |
(B49 894 01) | 9,5-mm-Reduzierstücke für Schnellspanner an Instant Drive 360-Naben (HR) |
(129 838 01) | UST-Ventil und Zubehör |
Tubeless-Felgenband | |
Bedienungsanleitung |