Crossmax Pro 29

  • Front 27.5" Weight : 700 g
  • Front 29" Weight : 730 g
Crossmax Pro 29

Spare parts

Rims

1 V2316210 KIT FRONT RIM CROSSMAX PRO 29'' 22mm TSS

Spokes

2 V2386401 KIT 1 275mm 27,5'' + 1 293mm 29'' CROSSMAX PRO STAMPED BUTTED ALU SPOKE - while stock last
2 V2384801 KIT 12 FT/NDS CROSSMAX PRO 29'' AL SPK 293mm

Wheel Hub

3 N/A HUB BODY
4 99688501 BEARING KIT 9/12/15 D6T HUB 20x32x7 6804
5 V2252301 KIT MY16 FRONT AXLE ROAD DISC 9/12/15 INT
7 N/A HUB BODY
8 V2370701 KIT FRONT QRM+ AXLE BOOST INTL 110mm
10 N/A HUB BODY
11 M40771 BEARING KIT FOR LEFTY 50 & 60 HUB
12 36709301 ASSEMBLY KIT FOR LEFTY SUPERMAX WHEELS

{options}

OPT BOOST V2650201 ADAPTER Front Torque Cap 15x31 MTB QRM +

Tyres

13 39243232 Pulse Pro 29
13 39243221 Pulse Pro 29

Adapters

6 B4104301 ADAPTER Ft 9mm QR QRM+
9 B4104401 ADAPTER Ft 15mm QRM+

Information

Rims

Valve
Ø Valve hole (mm): 6,5
Section
Recommended clincher/tubular width: 1,1" to 2,5" (28 - 62mm)

Spokes

Lacing pattern: 2-cross
Tension (kg) : 100/110 front

Wheel Hub

MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
  • Rear 27.5" Weight : 835 g
  • Rear 29" Weight : 865 g
Crossmax Pro 29

Spare parts

Rims

1 V2317713 KIT RR RIM CROSSMAX PRO 29'' 22mm TSS OFFSET
1 V2316313 KIT REAR RIM CROSSMAX PRO 29'' 22mm TSS

Spokes

2 V2386401 KIT 1 275mm 27,5'' + 1 293mm 29'' CROSSMAX PRO STAMPED BUTTED ALU SPOKE - while stock last
2 V2384801 KIT 12 FT/NDS CROSSMAX PRO 29'' AL SPK 293mm
3 35113801 "KIT 10 DS M7/7 XMAX SLR/PRO 29"" SPK 269,5mm"

Wheel Hub

4 N/A HUB BODY
5 M40076 HUB BEARINGS 17x30x7 6903 x 2
6 99610701 ITS-4 FREEWHEEL SEAL
7 99610601 PAWLS KIT FOR ITS-4 (OR TS-2)
8 35126001 ITS-4 FREEWHEEL BODY + SEAL 2013 (NO PAWLS)
9 35684101 FREEHUB BODY XD TS2/ITS-4
10 30870401 REAR QRM + AXLE KIT ITS4 135mm from 2012
11 30871801 ELASTIC RING 56mm diam. ITS-4 20 SPOKES
13 N/A HUB BODY
14 V2370801 KIT REAR QRM+ AXLE BOOST ITS-4 148mm

Tyres

15 39243232 Pulse Pro 29
15 39243221 Pulse Pro 29

Adapters

12 30872201 FRAME SUPPORT ITS-4 135mm REAR AXLE > 2012
OPTION 30873101 2 REAR REDUCERS 12/9,5mm 2012 ITS4 HUB

Information

Rims

Valve
Ø Valve hole (mm): 6,5
Section
Recommended clincher/tubular width: 1,1" to 2,5" (28 - 62mm)

Spokes

Lacing pattern: Isopulse
Tension (kg) : 100/130 rear

Wheel Hub

MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.

DELIVERED WITH

(355 466 01) 1 bottle of Mavic Sealant
(V24 503 01 frt, V24 504 01 rear) BX601 quick releases
(996 941 01 for MTB or B41 043 01 for road) Front QR adapters
(308 593 01 for ITS4, 329 650 01 for TS2) Rear 12x142mm adapters for ITS4 and TS2
(129 838 01) UST valve and accessories
(325 423 01) Multifonction adjustment wrench
User guide