TECHNICAL DATA
Where to find serial number?
Cosmic Pro Carbon SL T Disc
Instructions- Weight : 730 g
Spare parts
Rims
| 1 | V2403910 | KIT FRONT RIM COS PRO CARB SL DISC TUBULAR |
Spokes
| 2 | V2277401 | KIT 12 FT/NDS COSMIC PRO CARB SL D T 278mm SP - while stock last |
| 2 | V3663001 | KIT 12 FRT/NDS COSMIC PRO CARB SL UST/UST Disc C/C Disc/T Disc BUTTED AERO STAINLESS SPOKE 278 + alu nippl.wash |
Wheel Hub
| 4 | 99688601 | BEARING KIT 9/15 DCL HUB 20x32x7 6804 + 25x37x7 6805 |
| 5 | V2252401 | KIT MY16 FRONT AXLE ROAD DISC 9/12/15 CL |
Adapters
| 6 | B4104301 | ADAPTER Ft 9mm QR QRM+ |
| 7 | B4104201 | ADAPTER Ft 12mm QRM+ |
| 8 | B4104401 | ADAPTER Ft 15mm QRM+ |
Information
Rims
Valve hole à (mm): 6,5
Recommended clincher/tubular width:
25 to 32Â mm
Spokes
Lacing pattern: 2-cross
Tension (kg): front
Tension (kg): front
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
- Weight : 810 g
Spare parts
Rims
| 1 | V2404013 | KIT REART RIM COS PRO CARB SL DISC TUBULAR |
Spokes
| 2 | V2277301 | KIT 12 DS COSMIC PRO CARB SL D T SPK 261mm - while stock last |
| 2 | V3663901 | KIT 12 NON DRIVE SIDE BUTTED AERO STAINLESS SPOKE 261 + alu nipple + washer |
| 3 | V3663001 | KIT 12 FRT/NDS COSMIC PRO CARB SL UST/UST Disc C/C Disc/T Disc BUTTED AERO STAINLESS SPOKE 278 + alu nippl.wash |
| 3 | V2277401 | KIT 12 FT/NDS COSMIC PRO CARB SL D T 278mm SP - while stock last |
Wheel Hub
| 4 | N/A | HUB BODY |
| 5 | V2560201 | KIT ID360 BEARINGS 15/28/7 + 17/28/7 |
| 6 | V2252701 | KIT ID360 INSERT SHAPED EAR LOBE > 2017 |
| 7 | V2251601 | KIT ID360 SEAL + GREASE |
| 8 | V2500501 | KIT ID360 3 PADS NOISE REDUCING |
| 9 | V2251701 | KIT ID360 2 RATCHETS + SPRING + GREASE |
| 10 | V2251801 | KIT 3 ID360 ROAD SPRINGS |
| 11 | V3430101 | HG11 Freewheel Body ID360 |
| 12 | V2252201 | KIT 2 REAR HUB RETENTION RINGS 48mm |
| 13 | V2251501 | KIT 3 ID360 WAVE WASHERS |
| 14 | V2251401 | KIT ID360 AXLE DISC CENTER LOCK |
| 15 | V2251101 | KIT ID360 HUB THREADED CAP DISC CENTER LOCK |
Adapters
| 16 | B4989901 | ADAPTER Rr 12x142mm ID360 (CLock) |
Information
Rims
Valve hole à (mm): 6,5
Recommended clincher/tubular width:
25 to 32Â mm
Spokes
Lacing pattern: IsopulseÂ
Tension (kg) 95/115 rear
Tension (kg) 95/115 rear
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
DELIVERED WITH
| BR601 quick releases | |
| Front 12 mm adapters | |
| Specific disc bolts | |
| User guide |