TECHNICAL DATA
Where to find serial number?
Crossmax XL pro Ltd 27.5 WTS
Instructions
Spare parts
Rims
| 1 | V2313910 | "KIT FRONT RIM CROSSMAX XL PRO LTD 27,5""" |
Spokes
| 2 | 36674901 | KIT 12 FT XMAX END/FT-NDS DEEMAX PRO 27,5'' ALU SPK 275mm |
Wheel Hub
| 3 | N/A | HUB BODY |
| 3 | N/A | HUB BODY |
| 4 | M40179 | FRONT BEARING 25x37x7 20mm AXLE |
| 5 | 30870501 | FRONT AXLE 20mm CROSSMAX + DEEMAX ULTI 2012 |
Adapters
| 6 | 12982901 | ADAPTER Ft 20x110mm |
Information
Rims
à Valve hole (mm): 6,5
Recommended clincher/tubular width:
1.5" to 3"
Spokes
Lacing pattern: 2-cross
Tension (kg) : 105/125 front
Tension (kg) : 105/125 front
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.
Spare parts
Rims
| 1 | V2314013 | "KIT REAR RIM CROSSMAX XL PRO LTD 27,5""" |
Spokes
| 2 | 36675101 | "KIT 10 DS XMAX SLR/END/PRO/DEEMAX PRO 27,5"" SPK 251,5mm" |
| 3 | 36674901 | KIT 12 FT XMAX END/FT-NDS DEEMAX PRO 27,5'' ALU SPK 275mm |
Wheel Hub
| 4 | N/A | HUB BODY |
| 5 | M40076 | HUB BEARINGS 17x30x7 6903 x 2 |
| 6 | 35126001 | ITS-4 FREEWHEEL BODY + SEAL 2013 (NO PAWLS) |
| 7 | 99610701 | ITS-4 FREEWHEEL SEAL |
| 8 | 99610601 | PAWLS KIT FOR ITS-4 (OR TS-2) |
| 9 | 30870401 | REAR QRM + AXLE KIT ITS4 135mm from 2012 |
| 11 | 30871801 | ELASTIC RING 56mm diam. ITS-4 20 SPOKES |
Adapters
| 10 | 30872201 | FRAME SUPPORT ITS-4 135mm REAR AXLE > 2012 |
Information
Rims
à Valve hole (mm): 6,5
Recommended clincher/tubular width:
1.5" to 3"
Spokes
Lacing pattern: isopulse
Tension (kg) : 105/125 rear
Tension (kg) : 105/125 rear
Wheel Hub
MAINTENANCE: Clean with a dry cloth or soapy water if necessary. Do not use a high-pressure washer.